Rendering in Maya 6.5 (A simple speaker drive unit.)

Show off your artwork created on SGIs!
User avatar
gijoe77
Posts: 222
Joined: Fri Jun 22, 2018 9:17 pm

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by gijoe77 » Sun Jul 29, 2018 8:24 pm

very nice work, I need to really get my head out of my ass and really get myself back on track with modeling/rendering etc

User avatar
Intuition
Posts: 44
Joined: Sat Dec 02, 2017 8:09 pm

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Intuition » Thu Aug 02, 2018 12:43 am

These are turning out nice. :) The bump really gives it some tactile feel.

User avatar
Irinikus
Posts: 358
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Irinikus » Thu Aug 02, 2018 3:46 pm

Intuition wrote:
Thu Aug 02, 2018 12:43 am
These are turning out nice. :) The bump really gives it some tactile feel.
With some fine tuning, you should be able to create some really cool models and realistic environments in which to place them with this software!

I'm pretty impressed with Maya so far.

By the way, it would be really cool if you did some Maya tutorials as well, as many, including myself would benefit from them. :)
Image

User avatar
Intuition
Posts: 44
Joined: Sat Dec 02, 2017 8:09 pm

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Intuition » Thu Aug 02, 2018 7:34 pm

I have two nice maya tuts planned out and I’m within a week or two of finishing up some very busy work I’ve done over the summer. At which point I will pull out the Octane or O2 and make a a few more tutorials. :)

User avatar
Irinikus
Posts: 358
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Irinikus » Sat Aug 04, 2018 4:38 am

Intuition wrote:
Thu Aug 02, 2018 7:34 pm
I have two nice maya tuts planned out and I’m within a week or two of finishing up some very busy work I’ve done over the summer. At which point I will pull out the Octane or O2 and make a a few more tutorials. :)
Im looking forward to watching your Maya tutorials, as I have allot to learn with regards to the features of this software! :)

Here's the next phase of the build:

Cabinet_perspShape_tmp-11 copy.png
Room_perspShape_tmp copy.png
Room_perspShape_tmp-1 copy.png
Room_perspShape_tmp-2 copy.png
Image

User avatar
sgienthu
Posts: 1
Joined: Tue Aug 07, 2018 2:15 pm

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by sgienthu » Tue Aug 07, 2018 3:02 pm

Good jobs Irinikus!

@Intuition, could you share here scene files (.mb) for cube_001.jpg and refl_Blur_001.jpg?

Thanks in advance!
Silicon Graphics... Serious Fun Forever!

:1600SW: :1600SW: :Indy: :Indy: :Indigo2_IMP: :Indigo2_IMP: :O2: :O2: :Octane2c: :Octane2c: :Fuelb: :Fuelb: :O3x0-2: :320:

User avatar
Irinikus
Posts: 358
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Irinikus » Wed Aug 08, 2018 5:16 pm

I'm starting to work on a proper scene to display the models in ounce they're complete, but I still have a long way to go: (This is the initial framework of my display scene)

IMG_4070.JPG
IMG_4072.JPG
Image

User avatar
Irinikus
Posts: 358
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by Irinikus » Fri Aug 17, 2018 2:00 pm

Here's my latest rendering: (It took quite a while to render, as the two light sources used, had 8 rays each.)

Room_perspShape_tmp-3 copy.png
Image

JacquesT
Posts: 124
Joined: Mon May 21, 2018 2:06 pm
Location: Somerset, UK

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by JacquesT » Sun Aug 19, 2018 4:45 pm

Seems images are broken as I can't see any on the page at all...
:Octaneb: 1x 400Mhz R12k, 1Gb, V8, 6.5.30
:O2: 300Mhz R5200, 384Mb, 6.5.22m, FPA with :1600SW: [300Mhz R12k project in the works]

User avatar
dexter1
Posts: 68
Joined: Thu May 24, 2018 9:30 am
Location: Zoetermeer, The Netherlands

Re: Rendering in Maya 6.5 (A simple speaker drive unit.)

Post by dexter1 » Sun Aug 19, 2018 5:58 pm

We are in the process of looking for alternatives to the forum software to perform a migration in the future to a new system. Due to security issues attachments are currently disabled, see the post from Raion-Fox: http://forums.irix.cc/viewtopic.php?f=37&t=359

Post Reply