SGI Octane2 freezing

For discussion of triage and repairs to SGIs as well as general hardware questions
Post Reply
workingclasshacker
Posts: 7
Joined: Fri Aug 03, 2018 4:11 pm

SGI Octane2 freezing

Post by workingclasshacker » Tue Aug 07, 2018 2:33 am

Hi, I have an Octane2 that I am trying to revive. It powers on fine, but when I start the irix installer, it freezes up at random and becomes unresponsive. Only way to continue is to pull the power and start over.

Any ideas?

Espen
Last edited by workingclasshacker on Wed Aug 08, 2018 6:58 pm, edited 1 time in total.
:O2: :Octane2c: :O2K_d-1: :O2K_d-1:

JacquesT
Posts: 124
Joined: Mon May 21, 2018 2:06 pm
Location: Somerset, UK

Re: SGI Octane2 freezing

Post by JacquesT » Tue Aug 07, 2018 2:55 am

Sounds like bad ram or bad cpu module? Start by testing ram in minimal pairs.
:Octaneb: 1x 400Mhz R12k, 1Gb, V8, 6.5.30
:O2: 300Mhz R5200, 384Mb, 6.5.22m, FPA with :1600SW: [300Mhz R12k project in the works]

Post Reply