Your hinv's (Post them here:)

For general discussion not fitting into other categories.
User avatar
Irinikus
Posts: 335
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Your hinv's (Post them here:)

Post by Irinikus » Sun Jul 08, 2018 6:38 am

Birchwood wrote:
Tue Jul 03, 2018 3:38 pm
I bought this 4K IRIS Indigo from eBay back in January, but I actually haven't got it to work until just a few weeks ago. It is my first SGI :)

iris.jpeg

Both the CPU board and HD was dead on arrival, but the plastics were almost perfect. Just two small scuff marks on the front at the left side of the speaker grill that might be possible to remove. Not to mention the front door is fully intact. Anyways, bought a new HD and CPU board from Ian Mapelson. And a 4400 CPU. And 256 MB RAM... Elan gfx board... I have easily upgraded it for the same amount I bought it for :D

1416.jpg
Very nice clean machine, now all you need is that Elan door to complete her! (if you can get your hands on the correct font, you could always get the Elan logo silkscreened onto your machines's existing door.)

IMG_2838.JPG
biigD wrote:
Sat Jul 07, 2018 5:53 pm

Code: Select all

Indigo2 1% hinv -v
FPU: MIPS R8010 Floating Point Chip Revision: 0.1
CPU: MIPS R8000 Processor Chip Revision: 2.2
1 75 MHZ IP26 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 2 Mbytes
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0
  Tape drive: unit 2 on SCSI controller 0: DAT
Integral SCSI controller 1: Version WD33C93B, revision D
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: GU1-Extreme
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
EISA bus: adapter 0

Code: Select all

Indigo2 3% /usr/gfx/gfxinfo
Graphics board 0 is "GR2" graphics.
        Managed (":0.0") 1280x1024 
        8 GEs, 2 REs, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
        GR2 revision 6, VB2.0
        HQ2.1 rev A, GE7 rev B,  RE3.1 rev A, VC1 rev B, MC rev D
        unknown, assuming 19" monitor
        Video board revision 3
Very cool RARE configuration, I love the 777 poster buy the way!
Image

User avatar
biigD
Posts: 6
Joined: Sat Jul 07, 2018 3:39 pm
Location: New York City

Re: Your hinv's (Post them here:)

Post by biigD » Tue Jul 10, 2018 3:02 pm

Thanks Irinikus!

I moved to New York City a couple years back and needed to thin my SGI collection for the smaller living space. The 777 poster made it natural to select a teal Indigo2 as my IRIX machine of choice. :)

I’ve been really happy with it - nobody is going to mistake the thing for an Octane, but it’s surprisingly responsive for a 75 MHz machine.
:Indigo2: POWER Indigo2 75MHz R8000, 256MB/18GB, Extreme

JacquesT
Posts: 118
Joined: Mon May 21, 2018 2:06 pm
Location: Somerset, UK

Re: Your hinv's (Post them here:)

Post by JacquesT » Wed Jul 11, 2018 12:50 pm

biigD wrote:
Sat Jul 07, 2018 5:53 pm

Code: Select all

Indigo2 1% hinv -v
FPU: MIPS R8010 Floating Point Chip Revision: 0.1
CPU: MIPS R8000 Processor Chip Revision: 2.2
1 75 MHZ IP26 Processor
Main memory size: 256 Mbytes
Secondary unified instruction/data cache size: 2 Mbytes
Instruction cache size: 16 Kbytes
Data cache size: 16 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0
  Tape drive: unit 2 on SCSI controller 0: DAT
Integral SCSI controller 1: Version WD33C93B, revision D
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: GU1-Extreme
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
EISA bus: adapter 0

Code: Select all

Indigo2 3% /usr/gfx/gfxinfo
Graphics board 0 is "GR2" graphics.
        Managed (":0.0") 1280x1024 
        8 GEs, 2 REs, 24 bitplanes, 4 auxplanes, 4 cidplanes, Z-buffer
        GR2 revision 6, VB2.0
        HQ2.1 rev A, GE7 rev B,  RE3.1 rev A, VC1 rev B, MC rev D
        unknown, assuming 19" monitor
        Video board revision 3
Lovely BigD! Cracking setup.
:Octane: 1x 400Mhz R12k, 1Gb, V8, 6.5.30
:O2: 300Mhz R5200, 384Mb, 6.5.30, FPA with :1600SW: [300Mhz R12k project in the works]

User avatar
jan-jaap
Posts: 73
Joined: Fri Jun 01, 2018 5:11 pm
Location: Netherlands
Contact:

Re: Your hinv's (Post them here:)

Post by jan-jaap » Fri Jul 13, 2018 5:07 pm

Irinikus wrote:
Sun Jul 08, 2018 6:38 am
Very nice clean machine, now all you need is that Elan door to complete her! (if you can get your hands on the correct font, you could always get the Elan logo silkscreened onto your machines's existing door.)
Not necessarily ... the "Elan silkscreen door" goes with an R3000 Elan Indigo. The R4x00 Elan Indigo had a standard (blank?) door and an "Elan" badge.

The devil is in the details :)

User avatar
Irinikus
Posts: 335
Joined: Sun Dec 10, 2017 2:10 pm
Location: Between Cape Town and Pretoria South Africa

Re: Your hinv's (Post them here:)

Post by Irinikus » Sat Jul 14, 2018 1:07 am

jan-jaap wrote:
Fri Jul 13, 2018 5:07 pm
Not necessarily ... the "Elan silkscreen door" goes with an R3000 Elan Indigo. The R4x00 Elan Indigo had a standard (blank?) door and an "Elan" badge.

The devil is in the details :)
elan_badge.jpg

Thanks for alerting me about this:D (Something to look out for.)

The only problem for those of us who don’t already have one, is that these badges must be super rare by now!
Image

User avatar
LarBob
Posts: 62
Joined: Mon Dec 25, 2017 4:08 pm
Location: Kentucky, United States
Contact:

Re: Your hinv's (Post them here:)

Post by LarBob » Mon Jul 16, 2018 3:57 pm

:Octane: Aezora:

Code: Select all

hinv -v
2 250 MHZ IP30 Processors
Heart ASIC: Revision D
CPU: MIPS R10000 Processor Chip Revision: 3.4
FPU: MIPS R10010 Floating Point Chip Revision: 0.0
Main memory size: 1216 Mbytes
Xbow ASIC: Revision 1.3
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 1 Mbyte
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: ESI
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3
:O2: Kiki:
Will be added here soon hopefully.

:O3x0-2: Calcifer:

Code: Select all

hinv -v
4 500 MHZ IP35 Processors
CPU: MIPS R14000 Processor Chip Revision: 1.4
FPU: MIPS R14010 Floating Point Chip Revision: 1.4
CPU 0 at Module 001c01/Slot 0/Slice A: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 1.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 1 at Module 001c01/Slot 0/Slice B: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 1.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 2 at Module 001c01/Slot 0/Slice C: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 1.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
CPU 3 at Module 001c01/Slot 0/Slice D: 500 Mhz MIPS R14000 Processor Chip (enabled)
  Processor revision: 1.4. Scache: Size 2 MB Speed 250 Mhz  Tap 0xa
Main memory size: 2048 Mbytes
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Memory at Module 001c01/Slot 0: 2048 MB (enabled)
  Bank 0 contains 512 MB (Standard) DIMMS (enabled)
  Bank 1 contains 512 MB (Standard) DIMMS (enabled)
  Bank 2 contains 512 MB (Standard) DIMMS (enabled)
  Bank 3 contains 512 MB (Standard) DIMMS (enabled)
Integral SCSI controller 0: Version QL12160, low voltage differential
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL12160, low voltage differential
IOC3/IOC4 serial port: tty3
IOC3/IOC4 serial port: tty4
Integral Fast Ethernet: ef0, version 1, module 001c01, pci 4
  PCI Adapter ID (vendor 0x1077, device 0x1216) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 4
  PCI Adapter ID (vendor 0x11c1, device 0x5802) PCI slot 5
IOC3/IOC4 external interrupts: 1
HUB in Module 001c01/Slot 0: Revision 2 Speed 200.00 Mhz (enabled)
IP35prom in Module 001c01/Slot n0: Revision 6.210
USB controller: type OHCI
:Octane: Aezora - Octane - 2xR10k 250 MHz - SI Graphics - 1 GB RAM - 6.5.30f
:O2: Kiki - O2 - R5k 180 MHz - 192 MB RAM - Currently dead
:O3x0-2: Calcifer - Origin 300 - 4xR14k 500 MHz - 2 GB RAM - 6.5.30m
:O3x0-2: Tohru - Origin 350 - 4xR16k 800 MHz - 4 GB RAM - 6.5.30m - on loan from Raion
Mirrors

CiaoTime
Posts: 10
Joined: Sun Jul 01, 2018 5:22 am

Re: Your hinv's (Post them here:)

Post by CiaoTime » Sun Aug 12, 2018 2:32 pm

Starting it off with something a little interesting. Apologies for the brutal image quality, heh.

Image

Two Origin 200 GigaChannels linked together over CrayLink and XIO!

Post Reply