Installing a PCI LSI SATA card in a FUEL
#1
Installing a PCI LSI SATA card in a FUEL
Hi, I need a little help with installing SATA card into FUEL (LSI Logic SAS3041XL-S).
My system is running 6.5.27m 

After plugging the card in (with attached linux xfs formatted disk), it is listed in hinv as 

PCI Adapter ID (vendor 0x1000, device 0x0050) PCI slot 2

but not detected as SCSI/SATA/SAS controller (like here http://www.sgidepot.co.uk/hinv079.txt) and I have failed to find any driver for it. SYSLOG also doesn't mention anything related. Heartbeat led on the PCI card blinks green, 4 failure leds are orange, activity leds are off

I have found only this guide dealing with such installation - http://www.jarredcapellman.com/2012/10/2...ep-by-step, but it's a different setup with the card being detected and mine isn't

Can you please point me to where I could find required drivers and/or installation guide? 

Thank you

EDIT: PROM version 6.210
(This post was last modified: 08-30-2018, 06:11 AM by andrew.)
andrew
O2

Posts: 2
Threads: 1
Joined: Aug 2018
Find Reply
08-28-2018, 10:42 PM
#2
RE: Installing a PCI LSI SATA card in a FUEL
Upgrading to 6.5.30 did the trick
andrew
O2

Posts: 2
Threads: 1
Joined: Aug 2018
Find Reply
08-30-2018, 08:47 PM


Forum Jump:


Users browsing this thread: 1 Guest(s)